Engineering Archives - Page 27 of 32

Calculate the torque applied by the lever and the torsional stress induced in the steel tube using the force measured in your load cell as the source data.

Posted on September 2, 2020 by Adam

Mechanics of Solids. Laboratory 3: Statically indeterminate torsional stresses. Submission requirements Carefully read through the instructions below, watch the video of this practical and use the prerecorded data for your lab report. Submit this in a pdf format on Learnline. You do not have to record the data yourself this year. General. When a shaft […]

Do you know what the different types of scientific error are? Have you considered uncertainty and resolution? Why have you found this gradient? What was the purpose? What units has it got?

Posted on August 29, 2020 by Adam

Remove equations not directly related to the experiment Check Steve’s guidance on pendulum consistency Why have you found this gradient? What was the purpose? What units has it got? Health and safety. Is this worth 4 marks? Try labeling hazards and precautions separately. If your struggling google the definitions of ‘hazards’ and ‘precautions’ Make sure your errors and […]

Are reflex actions (such as flinching from a hot stove) rational? Are they intelligent? Why would evolution tend to result in systems that act rationally? What goals are those systems designed to achieve?

Posted on August 25, 2020August 25, 2020 by Adam

SCI 1000C – Scientific Inquiry: Artificial Intelligence. Instructions: Be sure to answer every part of each question to receive maximum credit on this assignment. Every question is worth 10 points (if there are multiple parts to a question, their total sums to 10 points) for a maximum of 100 points. If any part of your […]

What is the total area of the collectors required to satisfy the need of having the swimming pool always at least at 25◦ C? Given that each collector is about 3 m2, how many collectors are needed?

Posted on August 22, 2020 by Adam

Q1. Wind Turbine As a consultancy you have been asked to compare the performance of a wind turbine power plant of 12 MW name plate capacity and a combined cycle gas turbine of the same size for the local energy mix in Victoria at a given location. Both power plants are used to provide power […]

Engineering: Design and construction of an IoT embedded single-phase to three-phase converter for driving 3-phase motor.

Posted on August 20, 2020 by Adam

Below is the technical report format for the presentation: Chapter One: Introduction shall provide in flowing sentence and paragraphs: brief background information about the subject of the report (supported by citing of relevant literature); the motivation and therefore significance of the study; the major aim and objectives of the study; the methodology used to solve […]

What is geothermal energy, how it is used, the different ways it is used, how its used across the world, the advantages and disadvantages.

Posted on August 20, 2020August 20, 2020 by Adam

What is geothermal energy, how it is used, the different ways it is used, how its used across the world, the advantages and disadvantages. Need to be worked on by adding more information and engineering recommendations, also numbers and data.

Develop explicit empirical equations for the determination of the elastic critical local buckling stress of RHS sections.

Posted on August 18, 2020 by Adam

Pultruded FRP sections are gaining increasing usage in construction due to their high strength to weight ratio and corrosion resistance. Their use is particularly promising in civil infrastructure with a long design life such as bridges. Due to their recent introduction in construction, design guidance is not as mature as design in traditional structural materials […]

Explore the use of BIM tools for assessing the holistic energy impact of buildings in different climates and building typologies.

Posted on August 12, 2020 by Adam

Explore the use of BIM tools for assessing the holistic energy impact of buildings in different climates and building typologies. The choice of materials affects the embodied energy, the building performance in terms of thermal comfort (being it cooling – as in hot climates – or warming – as in cold climates), the environmental impact […]

Apply industry standard techniques in the production, transferring and staking out of coordinates of multiple construction elements.

Posted on August 7, 2020 by Adam

The submission will be in the form of an individual written report and should include all of the field booking-sheets which must be dated and referenced accordingly within the report. Photographic evidence of the practical work including witness statements and observations of the stations should also be incorporated. Format your report with the use of […]

Assess the importance and significance of utilizing Modern Methods of Construction. Recognize and examine the efficiency of new technologies applied in the Construction Industry.

Posted on August 2, 2020 by Adam

Assess the importance and significance of utilizing Modern Methods of Construction. Recognize and examine the efficiency of new technologies applied in the Construction Industry. Examine various barriers of using 3D printing.

Essay Hotline

Welcome to EssayHotline!

Qualified and Professional Writers

Original, Plagiarism free Work

Safe and Secure

Ordering and Tracking

Rush Hour Papers

24/7 Support Staff

Category: Engineering

Calculate the torque applied by the lever and the torsional stress induced in the steel tube using the force measured in your load cell as the source data.

Do you know what the different types of scientific error are? Have you considered uncertainty and resolution? Why have you found this gradient? What was the purpose? What units has it got?

Are reflex actions (such as flinching from a hot stove) rational? Are they intelligent? Why would evolution tend to result in systems that act rationally? What goals are those systems designed to achieve?

What is the total area of the collectors required to satisfy the need of having the swimming pool always at least at 25◦ C? Given that each collector is about 3 m2, how many collectors are needed?

Engineering: Design and construction of an IoT embedded single-phase to three-phase converter for driving 3-phase motor.

What is geothermal energy, how it is used, the different ways it is used, how its used across the world, the advantages and disadvantages.

Develop explicit empirical equations for the determination of the elastic critical local buckling stress of RHS sections.

Explore the use of BIM tools for assessing the holistic energy impact of buildings in different climates and building typologies.

Apply industry standard techniques in the production, transferring and staking out of coordinates of multiple construction elements.

Assess the importance and significance of utilizing Modern Methods of Construction. Recognize and examine the efficiency of new technologies applied in the Construction Industry.